#####################################--input 资料前处理 a orig前处理 main_pre main_pre must 资料前处理 a.1 导入资料 input_file Unit.exe off 导入资料 a.2 层命名 re_layer_name_1 LayerRename.exe must 自动命名层 #a.3 删除长的层名 delete_layer_name Unit.exe off 删除相同部分长的层名 a.3 定义层属性 attribute_layer Unit.exe must 定义层属性 #a.4 层对齐 regist_layer Unit.exe must 层对齐 #a.5 IPC网络比对 ipc_net_comp Unit.exe must IPC网络比对 a.5 资料保存 main_pre_save Unit.exe must 保存资料 #a.6 设置参数 setbasic_info Unit.exe must 保存资料 #####################################--input 资料原稿处理 d edit前处理 main_orig main_orig must 资料原稿处理 d.1 创建外型层 ctreate_gko_layer Unit.exe must 创建外型层gko d.2 选单PCS外型 slect_gko_unit Unit.exe must 选单PCS外型 #d.2 图形归零 set_origin Unit.exe must 图形移动到归零 d.3 归零建Profile origin_profile Unit.exe must 创建Profile d.4 复制net备份 crate_net Unit.exe must orig复制到net #d.5 创建Profile crt_profile Unit.exe must 创建Profile #d.5 备份原稿 orig_backup Unit.exe must 备份原稿 d.6 删外型板外物 delete_outline Unit.exe must 参考外型层删除外型线 #d.8 删除板外物 delete_outside Unit.exe must 删除profile外的物件 d.7 检测空心PAD change_donut_pad Unit.exe must 检测是否有空心PAD #d.10 改外型层线宽 change_gko_wide Unit.exe must 改外型层线宽为0.15mm #d.11 保存资料 main_orig_save1 Unit.exe must 保存资料 #d.8 阻焊转pad constr_sm_pad Unit.exe must 阻焊转pad #d.9 线路转pad constr_signal_pad Unit.exe must 线路转pad d.8 转pad操作 constr_sm_pad Unit.exe must 阻焊转pad d.10 复制edit net_cpto_edit Unit.exe must 复制edit d.11 转铜皮操作 convert_surface_all Unit.exe must 线路转surface d.12 内层负片转正片 convert_polarity Unit.exe must 负片层转正片 d.13 保存资料 main_orig_save2 Unit.exe must 保存资料 #####################################--Drill 钻孔制作 f edit钻孔制作 main_drl main_drl must 钻孔制作部分 #f.1 钻孔处理 move_to_drl Unit.exe must 钻孔处理 #f.2 加油票孔 add_youpiao_hole Unit.exe must 加油票孔 #f.3 设置钻孔属性 drill_attribute Unit.exe must 设置钻孔属性 f.1 孔环互转设属性 drill_attributeAndMD_1 WinMain.exe must 两项合并 #f.2 删重叠孔 delete_duplicate Unit.exe must 删除重叠孔 #f.4 VIA0.6MM挑带线 viahole_sort_onc Unit.exe must 挑VIA0.6MM带线 f.4 钻孔补偿 compens_hole drillManager.exe must 钻孔补偿 #f.5 挑间距加除尘孔 hole_space_same_net Unit.exe must 挑出小间距和同一网络 #f.6 短槽拉长加引孔 add_slot_hole Unit.exe must 短槽加导引孔 #f.6 槽孔后缀和拉长 sort_compen_slot Unit.exe must 槽孔后缀和拉长 f.7 添加角孔及下刀孔 DrillJiaoKong WinMain.exe must 加清角孔 f.8 短槽及大孔预钻 yuzhuan_drl Predrilling.exe must 短槽及大孔预钻 f.9 孔图制作 create_gdd DrillMap.exe must 制作补偿前孔图 f.10 钻孔分刀 near_hole Unit.exe must 钻孔补偿检查 #f.10 挑出间距0.2 select_hole_pitch Unit.exe must 挑出间距0.2 #f.9 非沉铜做2drl create_2drl Unit.exe must 非沉铜做2drl f.11 钻孔分析对齐 analysis_drl Unit.exe must 钻孔分析 f.12 外形倒角与优化 rout_edit Unit.exe must 锣带编辑 #f.13 添加锣刀下刀孔 rout_hole Unit.exe must 添加锣刀下刀孔 #f.13 塞孔钻字 sai_drl_pn Unit.exe must 塞孔钻字 f.14 抽VIA孔 抽VIA孔 CMainPre.exe must 抽VIA孔 f.15 删除重孔 删除重孔 CMainPre.exe must 删除重孔 #f.16 蛛蛛孔移孔 蛛蛛孔移孔 WinMain.exe must 蛛蛛孔移孔 f.17 保存资料 main_drl_save Unit.exe must 保存资料 #####################################--Inner 内层正片制作 g edit内层负片 main_inner_pg inner_pg must 内层制作 g.1 花PAD优化 chg_pg_ths_pad Unit.exe must 花PAD优化 g.2 负片层优化 opt_pg_inner Unit.exe must 负片层优化 g.3 添加铜桥 AddBridgeInner Unit.exe must 添加铜桥 g.4 填充小间歇 fill_pg_inner Unit.exe must 填充小间歇 g.5 制作负片层掏层 shave_gko_pginner Unit.exe must Npth及外型掏铜 g.6 掏层减内层 shavedo_gko_pginner Unit.exe must 掏层减内层 g.7 负片层分析 analysis_pg_inner Unit.exe must 负片层分析 g.8 保存资料 inner_pg_save Unit.exe must 保存资料 #####################################--Inner 内层制作 i edit内层制作 main_inner main_inner must 内层制作 i.1 删除比孔小的PAD dele_pad_inner Unit.exe must 删除比孔小的PAD i.2 删除独立PAD dele_iso_pad Unit.exe must 删除独立PAD i.3 阻抗线调整 change_impline Unit.exe must 阻抗线挑整挑选 i.4 内层线路补偿 compen_inner Unit.exe must 内层线路补偿 #i.4 内层涨PAD opt_inner Unit.exe must 内层涨PAD #i.5 PAD和线掏铜 tao_cu_inner Unit.exe must PAD和线掏铜 #i.6 网格处理 net_convert_inner Unit.exe must 网格处理 i.5 涨PAD掏铜网格 opt_tao_netcvt_in Unit.exe must 涨PAD掏铜网格 i.6 掏铜皮 clip_cu Unit.exe must 掏铜皮 i.7 处理蜘蛛角 shave_zhizu_inner Unit.exe must 处理蜘蛛角 i.8 铜桥削PAD填间隙 shaveBridgefill_in Unit.exe must 内层削PAD #i.7 添加铜桥 AddBridgeInner Unit.exe must 添加铜桥内层 #i.8 内层削PAD shave_inner Unit.exe must 内层削PAD #i.9 内层填小间隙 fill_sliver_inner Unit.exe must 内层填小间隙 i.9 制作内层掏层 shave_gko_inner Unit.exe must Npth及外型掏铜 i.10 掏层减内层 shavedo_gko_inner Unit.exe must 掏层减内层 i.11 分析加泪滴 analysis_inner Unit.exe must 分析加泪滴 #i.8 加泪滴 teardrop_inner Unit.exe must 加泪滴 #i.13 内层分析 analysis_inner Unit.exe must 内层分析 #i.14 保存资料 inner_save Unit.exe must 保存资料 i.12 去除铜皮尖角 去除铜皮尖角 CMainPre.exe must 去除铜皮尖角 i.13 内层网络比对 netlist_inner Unit.exe must 内层网络比对 #####################################--Outer 外层线路制作 l edit外层制作 main_outer main_outer must 外层线路制作 l.1 删除比孔小的PAD dele_pad_outer Unit.exe must 删除比孔小的PAD l.2 设定SMD属性 set_smd_attr CMainPre.exe must 设定SMD属性 l.3 阻抗线调整 change_impline Unit.exe must 阻抗线挑整挑选 l.4 外层线路补偿 compen_delongouter Unit.exe must 外层线路补偿 #l.4 外层涨PAD opt_outer Unit.exe must 外层涨PAD #l.5 PAD和线掏铜 tao_cu_outer Unit.exe must PAD和线掏铜 #l.6 网格处理 net_convert_outer Unit.exe must 网格处理 l.5 涨PAD掏铜网格移线 opt_tao_netcvt_ot Unit.exe must 涨PAD掏铜网格移线 l.6 掏铜皮 clip_cu Unit.exe must 掏铜皮 1.7 BGA夹线居中 opt_auto_set_line Unit.exe must BGA夹线居中 l.8 BGA夹线缩小 BGA夹线缩小 WinMain.exe must BGA夹线缩小 l.9 处理蜘蛛角 shave_zhizu_outer Unit.exe must 处理蜘蛛角 l.10 铜桥削PAD填间隙 shaveBridgefill_ot Unit.exe must 铜桥削PAD填间隙 1.11 填网格间隙 填网格间隙 CMainPre.exe must 填网格间隙 #l.8 添加铜桥 AddBridgeOuter Unit.exe must 添加铜桥外层 #l.9 外层削PAD shave_outer Unit.exe must 外层削PAD #l.10 外层填小间隙 fill_sliver_outer Unit.exe must 外层填小间隙 l.12 制作外层掏层 shave_gko_outer Unit.exe must Npth及外型掏铜 l.13 掏层减外层 shavedo_gko_outer Unit.exe must 掏层减外层 #l.13 加泪滴 teardrop_outer Unit.exe must 加泪滴 l.14 分析加泪滴 analysis_outer Unit.exe must 外层分析 l.15 去除铜皮尖角 去除铜皮尖角 CMainPre.exe must 去除铜皮尖角 l.16 动态补偿 动态补偿 CMainPre.exe must 动态补偿 l.17 高速SMD牛角补偿 高速SMD牛角补偿 CMainPre.exe must 高速SMD牛角补偿 l.18 网络比对 netlist_compare Unit.exe must 最终网络比对 l.19 保存资料 outer_save Unit.exe must 保存资料 #l.16 自动移线间距 自动移线间距 CMainPre.exe must 自动移线间距 #l.16 外层网络比对 netlist_outer Unit.exe must 外层网络比对 #####################################--Soldermask 外层绿油制作 o edit阻焊制作 main_sm main_sm must 外层阻焊制作 #o.1 检查阻焊 check_sm Unit.exe must 检查阻焊PAD比线路PAD小的 #o.1 选择大铜面开窗 selSmdonCopper Unit.exe must 选择大铜面开窗 #o.1 开窗缩小加大 resize_sm_larger_less Unit.exe must 开窗缩小加大 o.2 优化阻焊 opt_sm_all Unit.exe must 优化阻焊 #o.2 加大开窗 opt_sm Unit.exe must 优化阻焊 #o.3 削盖线和桥 shave_sm Unit.exe must 削盖线和桥 #o.3 大铜面开窗缩小 jilu_sm_on_cu Unit.exe must 大铜面开窗缩小 #o.4 削Bga盖线 BgaShave Unit.exe must 削盖线 o.4 分析阻焊 edit_sm Unit.exe must 阻焊编辑 o.5 孔加开窗档点 add_soldermask_dy Unit.exe must VIA孔加挡点 o.6 挡点网制作 ddw_fl Ddw_fl.exe must 挡点网制作 o.7 VIA塞孔处理 via_hole_mk_sm Unit.exe must VIA孔加挡点 #o.5 Npth孔加挡点 add_npth_sm Unit.exe must Npth孔加挡点 #o.6 无环Pth孔加挡点 add_pth_sm Unit.exe must 无环Pth孔加挡点 #o.3 分析阻焊 analysis_sm Unit.exe must 分析阻焊 o.8 阻焊削割 solder_smd_opt Unit.exe must SMD优化 #o.6 SMD墓碑效应 solder_smd_newo Unit.exe must SMD优化 o.9 阻焊加外型 add_gko_sm Unit.exe must 将外型复制到阻焊层 o.10 大孔与开窗孔挑选 hole_sm_state CMainPre.exe must 挑选孔开窗状态 o.11 邮票孔开窗 邮票孔开窗 CMainPre.exe must 邮票孔开窗 o.12 保存资料 solder_save Unit.exe must 保存资料 o.13 厚铜板缩小PTH开窗 厚铜板缩小PTH开窗 CMainPre.exe must 厚铜板缩小PTH开窗 #####################################--Silkscreen 外层文字制作 p edit文字制作 main_silk main_silk must 文字制作 #r.1 检查文字线宽 silk_min_line Unit.exe must 检查文字线宽 p.1 字宽掏层制作 create_silk_neg Unit.exe must 文字掏层制作 p.2 缩放字符 scale_silk Unit.exe must 缩放字框 #r.3 加中文和料号 add_job_silk Unit.exe must 加料号名称 p.3 加UL silk_ul_mark AddLogoUL.exe must 加UL #p.4 加动态周期 dynamic_dc AddLogoUL.exe must 加动态周期 p.4 周期建symbol build_symbol CycleBuildsSymble.exe must 周期建symbol p.5 加中文 add_chinese Unit.exe must 加中文字 p.6 掏层减字符 sm_reude_silk Unit.exe must 掏层减字符 p.7 二维码 二维码 CMainPre.exe must 二维码 p.8 保存资料 silk_save Unit.exe must 保存资料 #r.5 Via孔掏字符 via_reude_silk Unit.exe must Via孔掏字符 ##################################### ##################################### #################################### ##################################### #####################################--set制作 q set制作 main_set main_set must set连片制作 q.1 拼连片 set_array_Dialog_Tk Unit.exe must 拼连片 #q.2 加光点和孔 add_set_mark Unit.exe must 加光点和孔 q.3 工艺边加假铜 工艺边铺铜 CMainPre.exe must set_fill_cu q.4 尺寸标注 set_measure Unit.exe must 尺寸标注 q.5 选择的标注 set_manu_measure Unit.exe must 选择标注 #q.6 添加锣刀下刀孔 set_rout_hole Unit.exe must 添加锣刀下刀孔 #q.7 孔图制作 create_set_gdd DrillMap.exe must 制作补偿前孔图 q.8 添加序号 add_set_num Unit.exe must 添加序号 q.9 整体分析 analysis_set Unit.exe must 整体分析 #q.10 V-CUT图制作 set_vcut_map vcutpad.exe must V-CUT图制作 q.10 V-CUT测试PAD及字符防呆 vcut_pad vcutpad.exe must V-CUT测试PAD添加 q.11 保存资料 set_save Unit.exe must 保存资料 q.12 加邮票孔 add_youpiao_hole StampHole.exe must 加邮票孔 q.13 线路层标识 线路层标识 CMainPre.exe must 线路层标识 q.14 碳油测试PAD 碳油测试PAD CMainPre.exe must 碳油测试PAD q.15 自动合层 自动合层 CMainPre.exe must 自动合层 #t.2 加光点和孔 add_set_mark Unit.exe must 加光点和孔 #t.3 填铜 set_fill Unit.exe must 加光点和孔 #h.3 加序号 set_array array.exe=up 拼连片 #h.4 加周期和UL set_array array.exe=up 拼连片 ##################################### r 阻抗制作 crt_coupon main_coupon must 阻抗制作 r.1 阻抗制作 crt_coupon coupon_chaoyue.exe must 阻抗制作 ##################################### #s 板边处理 main_panl main_panl must 板边处理 ##################################### u 资料后处理 main_end main_end must 资料后处理跑板边和输出等 #u.4 复制层程序 copy_layer Unit.exe must 从其他料号复制层程序 #u.5 层的比对 comparelayer Unit.exe must 层的比对 #u.7 网络比对 netlist_comp Unit.exe must 网络比对 u.2 板外检测 CHK_FearInSr_main CMainPre.exe must 检查物件进单元内外 #u.3 档油孔点制做 solder_dy Unit.exe must 档油制做 u.4 标线宽 jia_xian JiaXian.exe must 标线宽 #u.4 短槽旋转加带3孔 rotate_slot Unit.exe must 短槽旋转加带3孔 u.5 跑板边 run_panel panel.exe must 跑板边程序 u.6 CAM完成自检程序 checks checks.exe must CAM完成自检程序 u.7 资料输出 output_main output_main.exe must 输出原稿和单元 u.8 旧资料移靶标 oldTargetToNew MainPre.exe must 旧资料移靶标 #u.11 自动标注 set_measure CMainPre.exe must 自动标注 u.9 制作靶孔图 制作靶孔图 CMainPre.exe must 制作靶孔图 u.10 加自动V-CUT孔 加自动V-CUT孔 CMainPre.exe must 加自动V-CUT孔 u.11 自动V-CUT图 自动V-CUT图 CMainPre.exe must 自动V-CUT图 u.12 PNL锣边制作 PNL锣边制作 CMainPre.exe must PNL锣边制作 u.13 添加喷墨点 添加喷墨点 CMainPre.exe must 添加喷墨点 #u.11 制作靶孔图 OutPinDimPDF MainPre.exe must 制作靶孔图 #u.7 图纸制作 tuzhi_edit Unit.exe must 图纸制作 #u.8 图纸输出 print_pdf Unit.exe must 输出原稿和单元 #u.6 阻抗图纸输出 printIMP_pdf Unit.exe must 阻抗图纸输出 #u.9 加喷印233属性 OCalladdPrt233 Unit.exe must 加喷印233属性 #u.10 加喷印num&Barcode OCalladdPrtBcode Unit.exe must 加喷印num&Barcode #u.11 文字喷印输出 OCallprtSilkOutput Unit.exe must 文字喷印输出 #u.6 制作锡膏层 add_paste_lay Unit.exe must 制作贴件层 #u.12 数据上传MES JobInfoRep Unit.exe must 输出资料信息 #u.10 计算锣程 calcRoutLength Unit.exe must 计算锣程 #u.11 更改文字序号 text_number_chg Unit.exe must 更改文字序号 #u.9 数据上传ERP data_to_erp Unit.exe must 数据上传ERP #u.9 计算铜面积 calc_inner_area Unit.exe must 计算内层铜面积 #u.12 AOI资料输出 output_aoi Unit.exe must AOI资料输出 #u.10 更改属性周期 change_attr_code Unit.exe must 更改属性周期 #u.9 更改8888周期 change_8888_code Unit.exe must 更改8888周期 #v.3 输出公制3_3 output_33gerber Unit.exe must 输出公制3_3 #v 导出Tgz output_tgz spec_sub must 导出Tgz #v 层极性转换 lay_pol_cvt spec_sub must 层极性转换 #w 导出Tgz output_single_tgz spec_sub must 导出Tgz #x 导进Tgz input_tgz spec_sub must 导进Tgz #####################################--退出 #y 关闭当前料号 close_cur_job Unit.exe must 关闭当前料号 #y 输出TGZ save_cur_job Save must 输出当前料号TGZ #y.1 测试 test test.pl must 测试 #####################################--工具 v 工具 tool tool must 工具 v.1 计算残铜率&电镀面积 计算残铜率&电镀面积 CMainPre.exe must 计算残铜率&电镀面积 v.2 喷锡&沉金面积 喷锡&沉金面积 CMainPre.exe must 喷锡&沉金面积 v.3 单位换算 dw dw.exe must 计算工具 v.4 大写转小写 tolower CMainPre.exe must 剪贴板内容转小写 ##################################### w 完成提交 sendInner sendInner must 提交 w.1 内层完成提交 sendInner Unit.exe must 内层完成提交 w.2 全部完成提交 sendAll Unit.exe must 全部完成提交 ##################################### z 退出 exit Exit must 退出程序 z.1 退出 Exit_Script Unit.exe must 退出程序 #####################################